|Job Title:||Services Quality Engineer – Metrologist|
|Description:||This is an exciting opportunity for a new college hire to join a very successful, results oriented global organization which delivers Service and Support for the Electronic Measurement Groups (EMG) products.This position is to develop a new college hire into an entry level Metrologist who will be a key member of the Worldwide Customer and Support (WCSS) metrology team, and is therefore accountable for providing engineering guidance and evaluation of measurement technique suitability utilizing the uncertainty of the measurement. The Metrologist is also responsible for applying international metrology standards (i.e., GUM) in solving measurement uncertainty problems. The person in this position will learn to represent international quality standards (e.g., ISO/IEC 17025, ISO 9000) in guiding Agilent organizations. This role further provides an interface between Agilent’s customers or vendors and Agilent on metrology issues as needed.
Services is one of the fastest growing industries in the world and gaining experience in the field of Metrology will be an invaluable skill.
If this sounds like a great career opportunity you would like to pursue, please apply for this position. We will invest in a multi-year development plan for an appropriate candidate who is desirous of learning to become a Metrologist or wants to increase their current metrology skills.
The chosen candidate will apply measurement science, mathematics, statistics, physics and electronics to develop, document, and maintain calibration systems, procedures and methods for different disciplines (dimensional, electrical, physical, optical, mechanical, etc.) to ensure measurement accuracy. Position further requires a desire to apply an in-depth understanding of how to both develop and evaluate new calibration methods and procedures.
|Qualifications:||• Bachelors Degree or higher in Statistics, Mathematics, Science or Engineering.
• A willingness to learn or reinforce experience in the following areas- uncertainty analysis, risk assessment, calibration intervals, instrumentation, troubleshooting, procedure writing, QA, laboratory accreditation assessments.
• Some knowledge or experience with most measurement technology in the areas of (DC and low frequency AC) voltage and current, power, resistance, RF, phase of RF signals, and time and frequency.
• Basic knowledge or an aptitude to learn about the accreditation process and requirements, such as proficiency testing.
• Familiar with or an aptitude to quickly learn internal Excel-based tools for uncertainty calculations (i.e., QCalc, UnCal).
• Excellent verbal and written communication skills.
• Proficient in MS Office Suite: PowerPoint, Word, Excel
• Ability to build relationships across stakeholders.
• A team player.
• Highly self-motivated and strives for perfection.
• Superior analytical and problem solving skills.Agilent is an equal opportunity employer.
|Business:||Electronic Measurements Group|
|Country or Area:||United States|
|Job Type:||Future/Recent Graduates|
|Travel Required:||Yes, 10% of the Time|
(Temp Positions Only):
y – 9,24,12
Company Overview: Concord Tank Corporation is a petroleum storage tank maintenance and repair contractor (industrial construction). We work primarily at downstream refined petroleum product facilities in the Southeastern United States. Our customers are major oil companies and their subsidiaries. Concord Tank currently has 23 field and office employees.
Internship Description: The internship would be for a position as an assistant to our two project managers. We are looking for someone who would be willing to work 10-15 hours during the fall and spring semesters. The internship responsibilities would include: ordering project materials, getting quotes, helping track job progress and helping bid projects. In addition to these responsibilities we will work to make sure that any intern has the opportunity to visit facilities and get a good understanding of the needs and challenges facing the petroleum industry in the United States.
Office Location: 51 D Carpenter Ct NW, Concord, NC 28027
- · Civil or Mechanical Engineering Major.
- · Juniors and Seniors preferred.
- · Transportation to and from our office in Concord.
- · Basic computer ability (typing, Excel, & Word).
- · Good interpersonal skills (will be regularly talking with suppliers and field employees).
- · Would prefer applicants who may be interested in working in the oil industry after graduation.
Send all resumes or questions to Peter Williams (email@example.com).
Entry Level Mechanical Engineer Job Posting, Immediate Hire – 9,12,2012
Wabtech (Duncan, SC) has an immediate need for a Mechanical Engineer. Apply through NinerJobNet.
|Job Title: Mechanical Engineer|
|Description:Mechanical engineer in the sustaining engineering department responsible for aftermarket design and modification of pneumatic air brake valves, brake units, air compressors, couplers and test equipment. Duties include designing with 3D modeling software, hands on problem solving, customer training and technical support of the marketing department. Travel is required several times per year usually not exceeding one week at a time.Wabtec Passenger Transit is a leading manufacturer of air brake systems and couplers for subways and passenger trains. See more information at www.wabtec.com.|
OPPORTUNITY FOR SUMMER INTERNSHIP
Northrop Grumman – Aerospace Systems
Location: 1201 Continental Blvd. Charlotte
Job Title: Optical Fabrication Engineering Intern
Hours Working: 8:00am – 5:00pm
Candidate will assist Optical Fabrication Engineers on projects by gathering and analyzing data, working with hands-on processes, and troubleshooting issues. Projects may include learning and documenting processes, designing and running trials for new tooling fixtures, and assisting in writing program macros for dimensional measurements. Additional tasks will be to fabricate test parts and work with operators to optimize the polishing process. In doing so, the candidate will learn and apply principles of Lean, 6σ, and 5S as they pertain to the manufacturing environment.
EDUCATION, EXPERIENCE, AND SKILLS REQUIRED:
Ongoing college curriculum in engineering or science field.
Proficient in 3D CAD modeling software and knowledge of fabrication methods and equipment is desired.
If interested, please forward resume to firstname.lastname@example.org
|- Software Toolbox is seeking some folks, they should be on campus sometime this month. Check the Career Center Ninerjob Net.- Heard Rockwell Automation is seeking folks, gonna be more for the ECE’s……check their website www.ra.rockwell.com or justrockwell.com cannot recall.- Northrop Grumman – Aerospace Systems SYNOPTICS also has a need for a full-time person besides the intern.- NSG North America, the EE for Laurinburg, resumes can go to: email@example.comThose seeking summer internships, may want to check out the Career Center’s Job Fair on Friday, Feb. 10th. See below on all that are coming….|
|Senior Mechanical Engineer Job Description The Senior Mechanical Engineer will work in a variety of areas related to the design of Bruker’s Atomic Force Microscope (AFM) product line. The Senior Mechanical Engineer will be involved with the design of various sub-assemblies and integration of these modules into the overall AFM system. Examples of the types of activities include: design of precision stages for sample positioning; design and modal / thermal FEA modeling of components and structures; design, modeling , integration and testing of peripheral modules such as vibration control systems, acoustic enclosures, wafer loading and transport modules; and selection and qualification of new manufacturing technologies for improved product performance and cost. While the range of activities that the position may involve is large, a key area of focus will be in the design of assemblies with precision motion and integrated imaging capability, implemented with both discrete components as well as off-the-shelf modules.
The candidate should have extensive practical experience in precision mechanical engineering along with the ability to effectively work with a wide range of personnel such as electronic, optical, and software engineers and technical marketing functions. The position will involve most aspects of the product development process, including development of engineering specifications, design and analysis, test and characterization, and assisting in the generation of production documentation. Atomic Force Microscopes can image, characterize, manipulate, and modify the surfaces of materials down to molecular and atomic dimensions, and the mechanical design and control of such systems requires outstanding fundamental engineering skills that cover a broad range of disciplines. This is a tremendous opportunity to work at an acknowledged world leader in analytical instrumentation – Bruker – and the world leader in the field of Scanning Probe Microscopy, a major enabling tool of nanotechnology research and development. Although the ideal candidate will be an experienced engineer with several years of directly applicable experience in a commercial environment, candidates who possess extensive experience in an academic or research institution are encouraged to apply. This is a very challenging position that requires a highly competent yet gregarious person who is confident in both their technical and interpersonal skills. If you fit most of the profile below, and want an opportunity to work with a very diverse and absolutely top-notch group of scientists and engineers, we want to hear from you, whether you’re from Dnepropetrovsk, Czestochowa, Aberystwyth, Ulaanbaatar, or Zzyzx, California.